Retour au blog
Guides pratiques 2026-11-16 Japanime Games | Your Source for the Best Anime Board 8 vues

SAO Kirito Sleeves: Fitting Them on a YGO Deck

SAO Kirito Sleeves: Fitting Them on a YGO Deck

A practical walkthrough for sleeving a Yu-Gi-Oh! deck with the officially licensed Sword Art Online Kirito sleeves, from checking measurements to keeping the art clean.

Start with the two measurements that decide fit

Before you sleeve a single card, confirm the sleeve dimensions against your deck. The Kirito sleeves are listed at 89 mm long and 62 mm wide, and they are described as Yu-Gi-Oh! sized. That gives you a concrete starting point for checking whether your cards will sit comfortably inside.

The pack contains 60 sleeves. Count your deck and any extra cards you want protected before you open the pack, so you know whether one pack covers the whole job or whether you need a second for a side deck or spares.

Confirmed Kirito sleeve details from the catalog

A simple sleeving sequence for a YGO deck

Work on a clean, flat surface and keep the sleeves face down until you are ready to load a card. The steps below follow the order that keeps the art protected and the cards straight.

  1. Count and sort first: Separate your main deck from side-deck and extra cards. With 60 sleeves in the pack, you can see immediately how many cards the pack will cover.
  2. Check one card against one sleeve: Slide a single card into a sleeve before you commit the whole deck. The listed 89 mm x 62 mm size is your reference point; if the card does not sit flat or the sleeve feels tight, stop and reassess rather than forcing it.
  3. Load cards one at a time: Insert each card fully so the top edge sits evenly against the sleeve opening. Avoid bending or creasing the card as it goes in.
  4. Fan and check the stack: Once the deck is sleeved, fan the cards gently and look for uneven seating or air pockets. Reseat any card that sits proud of the others.
  5. Store the deck flat: Keep the sleeved deck in a box or case that does not compress the sleeves. The Kirito art is the visible part of the sleeve, so protecting it from rubbing and pressure keeps the deck looking consistent.

What the listing confirms and what it leaves open

The supplied information confirms the officially licensed status, the 89 mm x 62 mm dimensions, and the 60-sleeve count. It does not include preparation or operating instructions, so any handling routine beyond careful loading and flat storage is your own practice rather than a manufacturer step.

The listing also does not confirm compatibility with double sleeving or with specific inner sleeves. Treat the stated Yu-Gi-Oh! sizing as the fit reference and test a single card before sleeving an entire deck.

Care habits that keep the Kirito art readable

  • Keep sleeves clean and dry: Wipe the outside of a sleeve with a soft dry cloth if it picks up dust. The listing does not specify cleaning products, so avoid anything that could cloud the printed surface.
  • Avoid overstuffing deck boxes: A box that presses on the sleeves can leave marks on the art. Choose storage that holds the deck without forcing it.
  • Resleeve worn sleeves: The stated purpose of these sleeves is protection from damage and wear. If a sleeve becomes scuffed or split, replace it rather than leaving the card exposed.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil